1. Only require a small tool box to complete an entire job.
Using Ezy Epoxy Tile Grout only requires a small number of tools to complete the job, a caulking gun, tubes of Epoxy, pressing tools, scraper & a dust pan and brush to collect the excess Epoxy.
Traditional cement-based grout requires a large number of tools and equipment to get the job done. Grout bags, mixing drill, buckets, extension cord, hose, power, water, sponges, broom, bin, knee pads and a mixing station to mix the powder and water.
This makes set up and clean up a lot quicker, easier and tidier when using Ezy Epoxy!
2. No heavy lifting of grout bags.
When preparing for a grouting job, traditional cement-based grout requires the tiler to manually carry bags of grout from the tile shop to their car and then from their car on to the job site, with each bag weighing between 5kg-20kg this can become taxing on the body.
Ezy Epoxy Tile Grout tubes only weigh 600 grams each which makes them a lot easier to manage and bring on and off the job site.
3. No messy mixing or messy clean up.
Ezy Epoxy Tile Grout comes in a dual-component tube simply dispersed through a caulking gun, no mixing required before application, simply load the tube in to the caulking gun and you are ready to go! Clean-up is simply throwing the used tube in the bin.
Cement-based grout comes in a large bag of powder and requires mixing, this is a time consuming and messy process.
Clean-up is also a time consuming and messy process, emptying unused grout mixture in to a bin and then rinsing and cleaning the buckets.
4. No water or electricity required to prepare grout.
As Ezy Epoxy comes in a dual-component tube ready to be dispersed, no water or power is required to complete the job.
Using cement-based grout requires water & electricity along with powder cords and hoses to mix the powder and water.
This means Ezy Epoxy can be applied on any job site, even if the site has no running water or power.
5. No wasted product, saving money.
Unlike traditional cement-based grout, Ezy Epoxy tubes can be resealed with the cap and used over and over.
Not only does this make the whole process cleaner and more efficient, it saves money as there is no wasted grout product. Once cement-based grout is mixed you cannot preserve or re-use any leftover mixture.
6. No blocked drains.
A common issue on the job site is cement-based grout being washed down the drain when removing the excess, this causes all sorts of issues for the builder and then the home owner when the drains are blocked.
Ezy Epoxy excess grout can be simply scraped off and then swept up with a broom.
7. No driving back and forward to the tile shop.
Ezy Epoxy offers free shipping Australia Wide!
This means you can simply place your order online and have the order delivered to your nominated address within 1-3 business days (depending on your location), no more time-consuming trip’s back and forward to the tile shop.
8.No expensive cleaning bill to remove grout residue.
Using cement-based grout leaves a thick residue on the tiles after application as the grout is smeared in to the tile joints, this requires a professional tile clean to get the tiles back to new at an average cost of $5 per square meter.
Once again, making Ezy Epoxy the quicker, easier & more cost effective grouting option!